success


From: Bencsath Boldizsar <boldi@datacontact.hu>
Subject: success
Date: Sat, 24 Mar 2001 20:30:45 +0100 (CET)

Next Article (by Date): syslog-ng Bencsath Boldizsar
Previous Article (by Date): The ultimate ACI-interface? Jörgen Sigvardsson
Next in Thread: Re: success Amon Ott
Articles sorted by: [Date] [Author] [Subject]


After yesterdays investigations I simly copied my fd_aci (29)=/rsbac to
fd_aci (18). With the change from kmalloc to vmalloc rsbac has been
started well.
Now it is fully working on that (complicated) computer.
/dev/md0 on / type ext2 (rw,errors=remount-ro,errors=remount-ro)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/sda1 on /boot2 type ext2 (rw)
/dev/sdb1 on /boot type ext2 (rw)
/dev/md2 on /tmp type ext2 (rw,nosuid,nodev,errors=remount-ro)
/dev/md1 on /var type ext2 (rw,nosuid,nodev,errors=remount-ro)
/dev/sdc1 on /data type ext2 (rw,nosuid,nodev,errors=remount-ro)
/dev/hda1 on /data2 type reiserfs (rw,nosuid,nodev)

You can see, reiserfs, raid, smp kernel: Linux db 2.4.2-rsbac #6 SMP,
I hope Amon will find the true reasons next week.
boldi

--------------------------------
Bencsath Boldizsar
boldi@etl.hu
--------------------------------

-
To unsubscribe from the rsbac list, send a mail to
majordomo@rsbac.org with
unsubscribe rsbac
as single line in the body.

Next Article (by Date): syslog-ng Bencsath Boldizsar
Previous Article (by Date): The ultimate ACI-interface? Jörgen Sigvardsson
Next in Thread: Re: success Amon Ott
Articles sorted by: [Date] [Author] [Subject]


Go to Compuniverse LWGate Home Page.