Re: Run time problem: 00:05 device unknown

From: Amon Ott <ao@rsbac.org>
Subject: Re: Run time problem: 00:05 device unknown
Date: Tue, 6 Mar 2001 08:53:31 +0100

Next Article (by Subject): Re: Run time problem: 00:05 device unknown Peter Busser
Previous Article (by Subject): Re: Run time problem: 00:05 device unknown Alessandro Iob
Top of Thread: Run time problem: 00:05 device unknown Alessandro Iob
Next in Thread: Re: Run time problem: 00:05 device unknown Peter Busser
Articles sorted by: [Date] [Author] [Subject]

On Die, 06 Mär 2001 Alessandro Iob wrote:
> on Mon, 5 Mar 2001 Amon Ott wrote:
> 
> > As 00:05 is a pseudo device for device-less mounts, ext2 is not likely to be
> > the cause.
> >
> > Alessandro: Can you find out, what filesystem has been mounted on 00:05, e.g.
> > using mount or df -a -x ext2 etc.? It must be something like proc or devpts.
> 
> Here are the outputs of df , mount and /etc/fstab
> 
> [root@d-evelop /root]# df -a -x ext2
> 
> Filesystem           1k-blocks      Used Available Use% Mounted on
> none                         0         0         0   -  /proc
> devfs                        0         0         0   -  /dev
> none                         0         0         0   -  /dev/pts
> 
> [root@d-evelop /root]# mount
> 
> /dev/ide/host0/bus0/target0/lun0/part2 on / type ext2 (rw)
> none on /proc type proc (rw)
> devfs on /dev type devfs (rw)
> none on /dev/pts type devpts (rw,mode=0620)
> 
> [root@d-evelop /root]# cat /etc/fstab 
> 
> /dev/discs/disc0/part1 swap swap defaults 0 0
> /dev/discs/disc0/part2 / ext2 defaults 1 1
> none /proc proc defaults 0 0
> none /dev/pts devpts mode=0620 0 0
> 
> Is this usefull?

Yes - I have seen a similar problem with devfs before. If you try without, it
might work.

1.1.1-pre5 will have changes in the mount interception, which might fix this.

Amon.
-
To unsubscribe from the rsbac list, send a mail to
majordomo@rsbac.org with
unsubscribe rsbac
as single line in the body.

Go to Compuniverse LWGate Home Page.