Re: problems with 2.4.0


From: "john huttley" <john@mwk.co.nz>
Subject: Re: problems with 2.4.0
Date: Tue, 9 Jan 2001 07:51:35 +1300

Next Article (by Subject): Re: problems with 2.4.0 "john huttley"
Previous Article (by Subject): Re: problems with 2.4.0 Amon Ott
Top of Thread: problems with 2.4.0 "john huttley"
Next in Thread: Re: problems with 2.4.0 "john huttley"
Articles sorted by: [Date] [Author] [Subject]


> > Then when I reboot it hangs at the point of "mounting local
filesystems".
> > its a hard lock too!
>
> This must be when reading in existing attribute files.
>
> > If I purge /rsbac it will get past that point. Then when I reapply them
it
> > wont boot again!.
> >
> > I have my "auth_set_cap"  statements in a script so its all very
repeatable.
> >
> > All 3 patches have been applied.
>
> They should not change anything here.
>
> > [snipped AUTH script, which looks fine]
>
> What filesystem types are you mounting?

The standard ext2

 Could you please reboot the locking case with kernel switches
> debug rsbac_debug_ds rsbac_debug_ds_auth rsbac_debug_ds_acl
> and send the result to me (if you can, e.g. via serial console)?
>
> Warning: this will give you loads of logging!

I dont have serial logging capability. It will take me a little while to
acquire and test the hardware.

meanwhile I've been using test-12, which works fine.

Regards

John

-
To unsubscribe from the rsbac list, send a mail to
majordomo@rsbac.org with
unsubscribe rsbac
as single line in the body.

Next Article (by Subject): Re: problems with 2.4.0 "john huttley"
Previous Article (by Subject): Re: problems with 2.4.0 Amon Ott
Top of Thread: problems with 2.4.0 "john huttley"
Next in Thread: Re: problems with 2.4.0 "john huttley"
Articles sorted by: [Date] [Author] [Subject]


Go to Compuniverse LWGate Home Page.