Re: success

From: Amon Ott <ao@rsbac.org>
Subject: Re: success
Date: Wed, 28 Mar 2001 09:18:46 +0200

Next Article (by Date): Re: RSBAC v1.1.1 problem Amon Ott
Previous Article (by Date): syslog-ng Bencsath Boldizsar
Top of Thread: success Bencsath Boldizsar
Articles sorted by: [Date] [Author] [Subject]

On Sam, 24 Mär 2001 Bencsath Boldizsar wrote:
> After yesterdays investigations I simly copied my fd_aci (29)=/rsbac to
> fd_aci (18). With the change from kmalloc to vmalloc rsbac has been
> started well.
> Now it is fully working on that (complicated) computer.
> /dev/md0 on / type ext2 (rw,errors=remount-ro,errors=remount-ro)
> proc on /proc type proc (rw)
> devpts on /dev/pts type devpts (rw,gid=5,mode=620)
> /dev/sda1 on /boot2 type ext2 (rw)
> /dev/sdb1 on /boot type ext2 (rw)
> /dev/md2 on /tmp type ext2 (rw,nosuid,nodev,errors=remount-ro)
> /dev/md1 on /var type ext2 (rw,nosuid,nodev,errors=remount-ro)
> /dev/sdc1 on /data type ext2 (rw,nosuid,nodev,errors=remount-ro)
> /dev/hda1 on /data2 type reiserfs (rw,nosuid,nodev)
> 
> You can see, reiserfs, raid, smp kernel: Linux db 2.4.2-rsbac #6 SMP,
> I hope Amon will find the true reasons next week.

The final release includes a bugfix against pre8. The FD entry for /rsbac dir
was put to the wrong list - the last one read. This is the reason for the entry
at the wrong place.

I will see, why moving an item makes the system hang. Sure a locking problem.

Memory allocation is going to be moved to our own slab cache, but this will have
to be investigated first.

Amon.
-
To unsubscribe from the rsbac list, send a mail to
majordomo@rsbac.org with
unsubscribe rsbac
as single line in the body.

Go to Compuniverse LWGate Home Page.